Before attempting to connect the Hexoskin Device to your shirt, make sure you have first:
2) done the Bluetooth pairing steps (if needed)
Please note that your Hexoskin Device can be used without the mobile app. Once step #1 is complete, the device will start recording automatically as soon as you plug it to the shirt connector. The recording LED (the middle orange LED) will stay on for the duration of the recording - this will mark the beginning of your record.
Step 1: Unzip the shirt pocket and grab the Shirt Connector
Step 2: Fully insert the connector until you feel a "click", the second LED should turn on.
Step 3: Place the Recording device in the pocket with the lights facing outwards, and the connector facing upwards.
*This is the reference point used by the Sleep position metric *
When you are done, unplug the device from your shirt. Once disconnected, the data recording will stop and the device will automatically shut down after 60 seconds. The second LED will turn off - this will mark the end of your record.
Keywords: connecting, plugging, disconnecting, start, begin, recording session, end, device position, LED light, plug