With the latest update to the Hexoskin iOS App, we have added a new pairing feature that lets you complete all the pairing steps within the App itself. You can also easily manage and switch between multiple Devices all within the Hexoskin App; no need to go back and forth between the phone/tablet's Bluetooth settings and the App.
*Some important things to note:
A) Do the initial pairing steps while the Device is not recording (i.e. not attached to the shirt, 2nd orange LED should be off). The Device cannot be placed in Pairing Mode when a recording is underway.
B) Once you install the latest update for the Hexoskin App, the pairing steps need to be completed from the beginning. If you had already paired a Hexoskin Device to your phone before this update, please go to your phone's Bluetooth settings, locate your HX-0000 Device and select "Forget this device" before following the steps below.
To connect your Hexoskin Device (Classic or Smart), follow these steps:
1. Open your Hexoskin App and log in with your Hexoskin account
2. Go to the Devices menu and select Change
3. You will now be taken to the pairing screen.
For Hexoskin Classic devices (serial < 42000):
4. To pair a new Hexoskin Classic Device, select the SN: 01000 - 41999 option.
5. Follow the instructions on-screen and place your Hexoskin Device in pairing mode (hold the button for 5 seconds until the blue light turns on).
6. A "Select An Accessory" menu will appear with your Hexoskin Device's serial number, select it.
7. Wait for the confirmation message that your Device is properly configured.
For Hexoskin Smart Devices (Serial > 42000):
4. To pair a new Hexoskin Smart Device, select the SN: 42000 to 99999 option.
5. Follow the instructions on-screen and place your Hexoskin Device in pairing mode (hold the button for 5 seconds until the blue light turns on).
6. When your Device appears in the list, select it and the status should display "connected".
Once the pairing steps are complete, your App should display the Hexoskin Device's status on the Home screen - it should indicate "not recording" or "idle". When you launch a record by attaching the Hexoskin Device to your Shirt (the second LED will turn on), the blue LED on your Device will flicker rapidly to signal that it is communicating with the App. On the Hexoskin App, your Device status will display "Recording" and your metrics will be displayed in real-time.
For any issues with the pairing steps, contact support@hexoskin.com.
Keywords: pair, pairing, Bluetooth, in-app
Comments
0 comments
Article is closed for comments.